| Specification | Description |
|---|---|
| Preliminary Specifications, Subject to Verification: | |
| Features: Full 4-Axis, 1400 Hours, Celos Control | |
| Pallet Size: (2) | 15.7" |
| X-Axis Travel: | 22.0" |
| Y-Axis Travel: | 22.0" |
| Z-Axis Travel: | 26.0" |
| Automatic Tool Changer Positions: | 240 |
| Spindle Taper: | Cat-40 |
| Spindle Speeds: | 15,000 rpm |
| Spindle Motor: | 41 h.p. |
| Rapid Travers Rate: X,Y,Z | 2362 ipm |
| Pallet Change Time: | 8 Seconds |
| Pallet Load Capacity: | 880 Lbs. |
| Max. Workpiece Diameter/Height: | 24.8" x 34.6" |
| Max. Tool Diameter: | 2.7"/6.6" |
| Max. Tool Length: | 17.7" |
| Max. Tool Weight: | 17.6 Lbs. |
| Spindle Center to Table Top: | 2.4" - 24.4" |
| Spindle Nose to Table Center: | 2.8" x 28.7" |
| Control: Celos M730 OUM | |
| Equipped With: | |
| * Full 4th Axis (direct drive rotary table) | |
| * High Speed/High Precision Function II | |
| * High Output 15,000 rpm Spindle Dual Contact | |
| * Through Spindle Coolant | |
| * Tool Storage (240) Rack Type | |
| * Spindle Chiller | |
| * (5) Pallet Edge Locator | |
| * "In machine tool measuring", Table Touch Sensor, | |
| Metrol. | |
| * Add'N of Opt'l Block Skip 2-9 (Soft Key Type) | |
| * Add'l Workpiece Coordinate System 48 Sets | |
| * Signal Tower 4 layers, red, yellow, green, blue | |
| * Dry Anchor | |
| * Program Resolution Multiplied by 1/10 | |
| * Tool Offsets 999 in total | |
| * Workpiece Position Compensation for Rotary Axis | |
| * Coordinate System Rotation | |
| Approximate Weight: 28,000 Lbs. | |
| Subject to Prior Sale, As-Is, Prior to Removal | |
Don Lewis Machinery & Equipment, Inc.
P.O.Box 3425
Thousand Oaks, CA 91359
805-427-4287